  |
    |
| (FDA) GMP Approved, ISO-9001, ISO-22000 HACCP, & "REACH" registered Kosher & Halal Certified |
-------------- 
Pure Potassium Carbonate & BP USP ACS Analytical Reagent FCC Food Grade Manufacturers Suppliers, India
Anmol Chemicals are manufacturers of Specialty Chemicals and Pharmaceutical Excipients, in India. Anmol Chemicals Group has manufacturing facilities spread across India, representatives in Houston Chicago USA and toll manufacturers in China. We make IP, BP, USP, Ph Eur, FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade and Pure Grades of various chemicals. All our items are analyzed to meet the required standards.
Our manufacturing facility is FDA GMP approved and ISO-9001, ISO 14000, OHSAS 18000, ISO 22000, FSSAI HACCP certified. We are offering products manufactured as per Kosher and Halal approved method. We are pre-registered with "Reach" for export to European countries.
CAS No.: 584-08-7, EC Code EINECS: 209-529-3, Molecular Weight: 138.21, Chemical Formula: K2CO3
Potassium Carbonate USP
K2CO3 (anhydrous) 138.21
Carbonic acid, dipotassium salt.
Dipotassium carbonate [584-08-7].
Sesquihydrate 165.23
Potassium Carbonate contains not less than 99.5 percent and not more than 100.5 percent of K2CO3, calculated on the dried basis.
Identification— It responds to the tests for Potassium and for Carbonate.
Loss on drying— Dry it at 180 for 4 hours: it loses not more than 0.5% of its weight.
Insoluble substances— Dissolve 1 g in 20 mL of water: the solution is complete, clear, and colorless.
Heavy metals— Dissolve 4.0 g in 10 mL of water, add 15 mL of 3 N hydrochloric acid, and heat to boiling. Add 1 drop of phenolphthalein TS, and neutralize with 1 N sodium hydroxide until the solution is faintly pink in color. Cool, and dilute with water to 25 mL: the limit is 0.0005%.
Potassium Carbonate BP
K2CO3
DEFINITION
Content: 99.0 per cent to 101.0 per cent (dried substance).
CHARACTERS
Appearance: White or almost white granular powder, hygroscopic.
Solubility: Freely soluble in water, practically insoluble in ethanol (96 per cent).
IDENTIFICATION
A. Dissolve 1 g in 10 ml of water. The solution is strongly alkaline.
B. 2 ml of the solution prepared for identification test A gives the reaction of carbonates and bicarbonates.
C. 1 ml of the solution prepared for identification test A gives reaction of potassium.
TESTS
Solution S: Dissolve 10.0 g in 25 ml of distilled water. Slowly add 14 ml of hydrochloric acid. When the effervescence has ceased, boil for a few minutes. Allow to cool and dilute to 50 ml with distilled water.
Appearance of solution: Solution S is not more opalescent than reference suspension and not more intensely coloured than reference solution.
Chlorides : Maximum 100 ppm.
Sulphates : Maximum 100 ppm.
Calcium: Maximum 100 ppm.
Iron: Maximum 10 ppm.
Heavy metals: Maximum 20 ppm.
Loss on drying: Maximum 5.0 per cent, determined on 0.300 g by drying in an oven at 120-125°C for 5 h.
Potassium Carbonate FCC Food Grade
K2CO3 Formula wt, anhydrous 138.21
K2CO3·1½H2O Formula wt, hydrated 165.23
INS: 501(i) CAS: [584-08-7]
DESCRIPTION
Potassium Carbonate is anhydrous or contains 1.5 molecules of water of crystallization. The anhydrous form occurs as a white, granular powder, and the hydrated form as small, white, translucent crystals or granules. It is very deliquescent, and its solutions are alkaline. One gram dissolves in 1 mL of water at 25° and in about 0.7 mL of boiling water. It is insoluble in alcohol.
Function: pH control.
REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Potassium and for Carbonate.
Assay: Not less than 99.0% and not more than 100.5% of K2CO3 after drying.
Insoluble Substances: Passes test.
Lead: Not more than 2 mg/kg.
Loss on Drying Anhydrous: Not more than 1%; Hydrated: Between 10.0% and 16.5%.
Potassium Carbonate Anhydrous ACS Analytical Reagent
Potassium Carbonate, Anhydrous
K2CO3
Formula Wt 138.21
CAS Number 584-08-7
REQUIREMENTS
Assay: 99.0% K2CO3 min
MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Chloride (as Cl): 0.003%
Nitrogen compounds (as N): 0.001%
Phosphate (PO4): 0.001%
Silica (SiO2): 0.005%
Sulfur compounds (as SO4): 0.004%
Ammonium hydroxide precipitate: 0.01%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium: 0.005%
Magnesium: 0.002%
Sodium (Na): 0.02%
Potassium Carbonate ACS Sesquihydrate Analytical Reagent
Potassium Carbonate Sesquihydrate
K2CO3 . 1.5H2O
Formula Wt 165.23
CAS Number 6381-79-9
REQUIREMENTS
Assay: 98.5-101.0% K2CO3 . 1.5H2O
Loss on heating at 285C: 14.0-16.5%
MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Chloride (as Cl): 0.003%
Nitrogen compounds (as N): 0.001%
Phosphate (PO4): 0.001%
Silica (SiO2): 0.005%
Sulfur compounds (as SO4): 0.004%
Ammonium hydroxide precipitate: 0.01%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Sodium (Na): 0.02%
Manufacturers
ANMOL CHEMICALS
S-8, SARIFA MANSION, 2ND PRINCIPAL SHAIKH HASAN MARG, MUMBAI 400009, INDIA
TEL: (OFF) 91-22-23726950, 23774610, 23723564. FAX: 91-22-23728264
e-mail: info@anmol.org
Copyright and Usual Disclaimer is Applicable
Exporters to USA, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai etc.
Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.
Fast Selling IP BP USP ACS FCC Food Grades of Chemicals by Anmol Chemicals
Aluminum Chloride ---------- Ammonium Sulfate ----- Ammonium Persulfate
Aluminum Potassium Sulfate - Ammonium Chloride ---- Ammonium Bicarbonate
Ammonium Carbonate --------- Benzyl Alcohol ------- Boric Acid
Benzoic Acid --------------- Borax; Sodium Borate - Calcium Chloride
Calcium Hydroxide ---------- Calcium Acetate ------ Calcium Butyrate
Calcium Lactobionate ------- Calcium Levulinate --- Calcium Saccharate
Carbamide Peroxide --------- Citric Acid ---------- Calcium Phosphate
Calcium Oxide -------------- Calcium Sulfate ------ Chromic Chloride
Cupric Chloride ------------
Ferric Chloride ------------ Ferric Nitrate ------- Fumaric Acid
Gentian Violet ------------- Glacial Acetic Acid
Lactobionic Acid ----------- Magnesium Butyrate
Magnesium Oxide ------------ Magnesium Chloride --- Magnesium Sulfate
Malic Acid ----------------- Maleic Acid ---------- Manganese Chloride
Manganese Sulfate ---------- Methylene Blue ------- Oleic Acid
Octyldodecanol -------------
Propylene Carbonate -------- Potassium Acetate ---- Potassium Carbonate
Potassium Hydroxide -------- Potassium Chloride --- Potassium Phosphate
Potassium Bitartrate ------- Propylene Carbonate -- Selenious acid
Sodium Molybdate ----------- Sodium Perborate ----- Sodium Phosphate
Sodium Propionate ---------- Sodium Acetate ------- Sodium Bicarbonate
Sodium Hydroxide ----------- Sodium Chloride ------ Sodium Thiosulfate
Sodium Selenite ------------ Urea ----------------- Zinc Chloride
Other Best Selling Products
Ammonium Bromide ----------- Ammonium Phosphate --- Barium Chloride
Butylated Hydroxyanisole --- Butylated Hydroxytoluene
Calcium Nitrate Nitrite ---- Calcium Propionate --- Copper Sulfate
Ceric Ammonium Nitrate ----- Cinnamaldehyde ------- Isatoic Anhydride
Directly Compressible Calcium Carbonate ----------- Encapsulated Citric Acid
Encapsulated Fumaric Acid -- Encapsulated Sodium Bicarbonate -
Encapsulated Sorbic Acid
Potassium Bromide ---------- Potassium Iodide ----- Potassium Nitrate Nitrite
Sodium Bromate ------------- Skatole -------------- Sodium Butyrate
Sodium Nitrite & Nitrate --- Sodium Bromide ------- Sodium Diacetate
Sodium Formaldehyde Bisulfite Strontium Chloride -- Stannous Chloride
TBHQ Tertiary Butylhydroquinone
Potassium Carbonate
Commercial Pure & USP BP ACS Analytical Reagent FCC Food Grade, CAS 584-08-7