  |
    |
| (FDA) GMP Approved, ISO-9001, ISO-22000 HACCP, & "REACH" registered Kosher & Halal Certified |
-------------- 
Magnesium Sulfate USP Magnesium Sulphate BP IP ACS Analytical Reagent FCC Food Grade Manufacturers Suppliers, India
Anmol Chemicals are manufacturers of Specialty Chemicals and Pharmaceutical Excipients, in India. Anmol Chemicals Group has manufacturing facilities spread across India, representatives in Houston Chicago USA and toll manufacturers in China. We make IP, BP, USP, Ph Eur, FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade and Pure Grades of various chemicals. All our items are analyzed to meet the required standards.
Our manufacturing facility is FDA GMP approved and ISO-9001, ISO 14000, OHSAS 18000, ISO 22000, FSSAI HACCP certified. We are offering products manufactured as per Kosher and Halal approved method. We are pre-registered with "Reach" for export to European countries.
Dried Magnesium Sulphate BP Magnesium Sulfate
Dried Epsom Salts
Preparation
Magnesium Sulphate Paste
DEFINITION
Dried Magnesium Sulphate contains not less than 62.0% and not more than 70.0% of MgSO4.
It may be prepared by drying magnesium sulphate at 100° until it has lost approximately 25% of its weight.
CHARACTERISTICS
A white powder.
Freely soluble in water; dissolves more rapidly in hot water.
IDENTIFICATION
Yields the reactions characteristic of magnesium salts and of sulphates.
TESTS
Acidity or alkalinity
To 10 ml of a 7.5% w/v solution in carbon dioxide-free water add 0.05 ml of phenol red solution. Not more than 0.2 ml of either 0.01M hydrochloric acid VS or 0.01M
sodium hydroxide VS is required to change the colour of the solution.
Arsenic
0.33 g dissolved in 25 ml of water complies with the limit test for arsenic, (3 ppm).
Heavy metals
Dissolve 1.3 g in 20 ml of water and add 1 g of ammonium chloride. 12 ml of the resulting solution complies with limit test A for heavy metals, Appendix VII. Use
lead standard solution(1 ppm Pb) to prepare the standard (15 ppm).
Iron
0.33 g dissolved in 10 ml of water complies with the limit test for iron, Appendix VII (30 ppm).
Chloride
0.13 g dissolved in 15 ml of water complies with the limit test for chlorides, Appendix VII (400 ppm).
Insoluble matter
7.5 g dissolves in 20 ml of water, producing a solution which may be slightly turbid at first but which becomes clear in a few minutes.
British Pharmacopoeia 2009
Magnesium Sulphate Heptahydrate
Magnesium Sulphate Heptahydrate BP
Epsom Salts
MgSO4,7H2O 246.5 10034-99-8
Action and use
Osmotic laxative; used in treatment of electrolyte deficiency.
DEFINITION
Content
99.0 per cent to 100.5 per cent (dried substance).
CHARACTERS
Appearance
White or almost white, crystalline powder or brilliant, colourless crystals.
Solubility
Freely soluble in water, very soluble in boiling water, practically insoluble in ethanol (96 per cent).
IDENTIFICATION
A. It gives the reactions of sulphates.
B. It gives the reaction of magnesium.
TESTS
Solution S
Dissolve 5.0 g in water R and dilute to 50 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
Acidity or alkalinity
To 10 ml of solution S add 0.05 ml of phenol red solution. Not more than 0.2 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour
of the indicator.
Chlorides
Maximum 300 ppm.
Arsenic
Maximum 2 ppm, determined on 0.5 g.
Iron
Maximum 20 ppm.
Heavy metals
Maximum 10 ppm.
Loss on drying
48.0 per cent to 52.0 per cent, determined on 0.500 g by drying in an oven at 110-120°C for 1 h and then at 400°C to constant mass.
Magnesium Sulfate USP
MgSO4·xH2O
Sulfuric acid magnesium salt (1:1), hydrate.
Magnesium sulfate (1:1) monohydrate 138.36
Magnesium sulfate (1:1) heptahydrate 246.48 [10034-99-8].
Anhydrous 120.37 [7487-88-9].
Magnesium Sulfate, rendered anhydrous by ignition, contains not less than 99.0 percent and not more than 100.5 percent of MgSO4.
Identification— A solution (1 in 20) resonds to the tests for Magnesium and for Sulfate.
pH: between 5.0 and 9.2, in a solution (1 in 20).
Loss on drying— Dry it at 105 for 2 hours: the anhydrous form loses not more than 2% of its weight.
Loss on ignition— Weigh accurately about 1 g in a crucible, heat at 105 for 2 hours, then ignite in a muffle furnace at 450 ± 25 to constant weight: the
monohydrate loses between 13.0% and 16.0% of its weight, the dried form loses between 22.0% and 28.0% of its weight, and the heptahydrate loses between 40.0% and
52.0% of its weight.
Chloride— A 1.0-g portion shows no more chloride than corresponds to 0.20 mL of 0.020 N hydrochloric acid (0.014%).
Iron—
FOR MAGNESIUM SULFATE INTENDED FOR USE IN PREPARING NON-PARENTERAL DOSAGE FORMS—
Dissolve 0.50 g in 40 mL of water and proceed as directed in the test for Iron: the limit is 20 µg per g.
FOR MAGNESIUM SULFATE INTENDED FOR USE IN PREPARING PARENTERAL DOSAGE FORMS— the limit is 0.5 µg per g.
Heavy metals— Dissolve 2 g in 25 mL of water: the limit is 0.001%.
Selenium— The limit is 0.003%.
Magnesium Sulfate FCC Magnesium Sulphate
Epsom Salt
MgSO4·xH2O Formula wt, monohydrate 138.38
Formula wt, heptahydrate 246.47
INS: 518 CAS: monohydrate [14168-73-1]
CAS: heptahydrate [10034-99-8]
CAS: dried [15244-36-7]
DESCRIPTION
Magnesium Sulfate occurs as a colorless crystal or a granular crystalline powder. It is produced with one or seven molecules of water of hydration or in a dried form
containing the equivalent of about 2.3 waters of hydration. It is readily soluble in water, slowly soluble in glycerin, and sparingly soluble in alcohol.
Function: Nutrient.
REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Magnesium and for Sulfate.
Assay: Not less than 99.5% of MgSO4 after ignition.
Lead: Not more than 4 mg/kg.
Loss on Ignition Monohydrate: Between 13.0% and 16.0%; Heptahydrate: Between 40.0% and 52.0%; Dried: Between 22.0% and 28.0%.
Selenium: Not more than 0.003%.
Magnesium Sulfate ACS Analytical Reagent Magnesium Sulphate
Reagent Chemicals
ACS Specifications
Magnesium Sulfate Heptahydrate
MgSO4 - 7H2O
Formula Wt 246.48
CAS Number 10034-99-8
REQUIREMENTS
Assay .............. 98.0-102.0% MgSO4-7H2O
pH of a 5% solution- 5.0-8.2 at 25C
MAXIMUM ALLOWABLE
Insoluble matter ... 0.005%
Chloride (Cl) ...... 5 ppm
Nitrate (NO3) ...... 0.002%
Ammonium (NH4) ..... 0.002%
Calcium (Ca) ....... 0.02%
Manganese (Mn) ..... 5 ppm
Potassium (K) ...... 0.005%
Sodium (Na) ........ 0.005%
Strontium (Sr) ..... 0.005%
Heavy metals (as Pb) 5 ppm
Iron (Fe) .......... 5 ppm
Manufacturers
ANMOL CHEMICALS
S-8, SARIFA MANSION, 2ND PRINCIPAL SHAIKH HASAN MARG, MUMBAI 400009, INDIA
TEL: (OFF) 91-22-23726950, 23774610, 23723564. FAX: 91-22-23728264
e-mail: info@anmol.org
Copyright and Usual Disclaimer is Applicable
Exporters to USA, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai etc.
Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.
Fast Selling IP BP USP ACS FCC Food Grades of Chemicals by Anmol Chemicals
Aluminum Chloride ---------- Ammonium Sulfate ----- Ammonium Persulfate
Aluminum Potassium Sulfate - Ammonium Chloride ---- Ammonium Bicarbonate
Ammonium Carbonate --------- Benzyl Alcohol ------- Boric Acid
Benzoic Acid --------------- Borax; Sodium Borate - Calcium Chloride
Calcium Hydroxide ---------- Calcium Acetate ------ Calcium Butyrate
Calcium Lactobionate ------- Calcium Levulinate --- Calcium Saccharate
Carbamide Peroxide --------- Citric Acid ---------- Calcium Phosphate
Calcium Oxide -------------- Calcium Sulfate ------ Chromic Chloride
Cupric Chloride ------------
Ferric Chloride ------------ Ferric Nitrate ------- Fumaric Acid
Gentian Violet ------------- Glacial Acetic Acid
Lactobionic Acid ----------- Magnesium Butyrate
Magnesium Oxide ------------ Magnesium Chloride --- Magnesium Sulfate
Malic Acid ----------------- Maleic Acid ---------- Manganese Chloride
Manganese Sulfate ---------- Methylene Blue ------- Oleic Acid
Octyldodecanol -------------
Propylene Carbonate -------- Potassium Acetate ---- Potassium Carbonate
Potassium Hydroxide -------- Potassium Chloride --- Potassium Phosphate
Potassium Bitartrate ------- Propylene Carbonate -- Selenious acid
Sodium Molybdate ----------- Sodium Perborate ----- Sodium Phosphate
Sodium Propionate ---------- Sodium Acetate ------- Sodium Bicarbonate
Sodium Hydroxide ----------- Sodium Chloride ------ Sodium Thiosulfate
Sodium Selenite ------------ Urea ----------------- Zinc Chloride
Other Best Selling Products
Ammonium Bromide ----------- Ammonium Phosphate --- Barium Chloride
Butylated Hydroxyanisole --- Butylated Hydroxytoluene
Calcium Nitrate Nitrite ---- Calcium Propionate --- Copper Sulfate
Ceric Ammonium Nitrate ----- Cinnamaldehyde ------- Isatoic Anhydride
Directly Compressible Calcium Carbonate ----------- Encapsulated Citric Acid
Encapsulated Fumaric Acid -- Encapsulated Sodium Bicarbonate -
Encapsulated Sorbic Acid
Potassium Bromide ---------- Potassium Iodide ----- Potassium Nitrate Nitrite
Sodium Bromate ------------- Skatole -------------- Sodium Butyrate
Sodium Nitrite & Nitrate --- Sodium Bromide ------- Sodium Diacetate
Sodium Formaldehyde Bisulfite Strontium Chloride -- Stannous Chloride
TBHQ Tertiary Butylhydroquinone
|
Magnesium Sulfate Heptahydrate | Magnesium Sulfate Anhydrous |