(FDA) GMP Approved, ISO-9001, ISO-22000 HACCP, & "REACH" registered Kosher & Halal Certified

--------------

Drag Reducing Agent or Friction Reducer Manufacturers Suppliers Exporters, Fracking Chemicals India USA

Anmol Chemicals are manufacturers of Fracking or Fracturing Chemicals, Specialty Chemicals and Pharmaceutical Excipients, in India. Anmol Chemicals Group has manufacturing facilities spread across India, representatives in Houston Chicago USA and toll manufacturers in China.

Our manufacturing facility is FDA GMP approved and ISO-9001, ISO 14000, OHSAS 18000, ISO 22000, FSSAI HACCP certified. We are offering products manufactured as per Kosher and Halal approved method. We are pre-registered with "Reach" for export to European countries.

DESCRIPTION
FinoDR is a proprietary blend of complex organic hydrocarbons used to help reduce drag, lower back-pressure, and improve flow in crude oil pipelines. FinoDR Drag Reducing Agent creates a molecular bond with crude oil and utilizes wall layer modifications to reduce turbulent friction in the system. This results in laminar flow conditions in pipelines with abnormally high Reynolds numbers. This helps reduce the amount of energy required to transport the liquid and improves the flow characteristics.

APPLICATION
FinoDR is recommended where producers are experiencing restricted flow due to volume of flow and/or line restrictions from deposits or paraffins. FinoDR Drag Reducing Agent works to remove these deposits, while reducing the energy loss from turbulent flow conditions. This product was designed to be used in crude systems and therefore has excellent solvency and compatibility given its organic structure. It is recommended for use in refinery and pipeline applications as an alternative to typical long chain polymer products either because they cannot be used or have proven ineffective. FinoDR should be injected neat into the flowing stream of crude upstream of any flow restrictions. The product is typically used at a dosage rate of 50 - 800 ppm depending on the line restriction and volume of flow to be increased. It is recommended to start at lower injection rates and ramp up slowly to allow for full system saturation to achieve the desired results.

ADVANTAGES
Typical drag reducers tend to be easily sheared. The components used in FinoDR are shear stable and in the event that shearing occurs the FinoDR starts to repair it within seconds and revert to its original structure quickly after shear.  The polarity of the molecules helps to form micelles, which disrupt turbulent flow and reduce friction within the fluid and along the pipe walls. Other potential benefits are improved pipeline pump efficiencies and reduced maintenance costs. Typical drag reducers require specialized pumping equipment due to the breakdown of polymers and heavy viscosity, while FinoDR can be pumped through standard chemical pumps and filters.

PROPERTIES
Viscosity, CST@ 20C: 0.55
Color: Light Amber
Appearance: Liquid
Odor: Mild Hydrocarbon
Specific Gravity: 0.81
The values shown here are typical and may vary within modest ranges

Manufacturers

ANMOL CHEMICALS
S-8, SARIFA MANSION, 2ND PRINCIPAL SHAIKH HASAN MARG, MUMBAI 400009, INDIA
TEL: (OFF) 91-22-23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: info@anmol.org

Copyright and Usual Disclaimer is Applicable

Exporters to USA, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai etc., India

Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.

Drag Reducing Agent
Friction Reducer, Fracking Chemicals

We also offer Fracking Chemicals like:
Ammonium Persulfate
Acetic Acid Solution ------- Acid Emulsifier ------- Acid Retarder
Acid Corrosion Inhibitor --- Acid Viscosifier ------ ATMP Phosphonate
Barium Sulfate Scale Remover - Bis[HexaMethylene Triamine Penta (Methylene Phosphonic Acid)]
BME Iron Reducer ----------- Crosslinker ---------- Cement Defoamer
Clay Stabilizer ------------ Coil Tubing Lube ----- Citric Acid Solution ------- Diverting Agent
Diethylenetriamine penta methylene phosphonic acid- Didecyl Dimethyl Ammonium Chloride DDAC
Drag Reducing Agent -------- Encapsulated Gel Breaker - Enzyme Gel Breaker
Liquid Iron Control -------- Dry Friction Reducer - Flow Back Aid
Foam 810 ------------------- Corrosion Inhibitor cum Bactericide and Oxygen Scavenger
Heavy Crude Foamer --------- Friction Reducer ----- Foamer for Deliquification of Gas Wells
Guar Gum Slurry Powder ----- Glutaraldehyde ------- Glycerin
Gas Hydrate Inhibitor ------ Gel Sweep ------------ Iron Sulfide Scale Inhibitor
High pH Buffer ------------- HP-HT Lube ----------- HEDP Phosphonate
Non-Triazine Based Hydrogen Sulfide H2S Scavenger -- Hydrogen Sulfide H2S Scavenger
Liquid FR Breaker, Sodium Chlorite ---------------- Liquid Beads
Mud Remover or Mud Cleaner - Non Emulsifier for Acidizing
Non Emulsifier for Brines --- Oil Gelling Agent ---- Paraffin Dispersant
Pipe Pickle ---------------- Preformed Particle Gel for Conformance Control
Relative Permeability Modifier - Sodium Chlorite Solution - Scale Inhibitor
Extended Release Scale & Paraffin Inhibitor -------- Sand Consolidation System
Sodium Bromate ------------- THPS Tetrakis Hydroxymethyl Phosphonium Sulfate
Total Acidizing System ----- Xanthan Gum Slurry