(FDA) GMP Approved, ISO-9001, ISO-22000 HACCP, & "REACH" registered Kosher & Halal Certified

--------------

Diverting Agent Manufacturers Suppliers Exporters, Fracking Chemicals India USA

Anmol Chemicals are manufacturers of Fracking or Fracturing Chemicals, Specialty Chemicals and Pharmaceutical Excipients, in India. Anmol Chemicals Group has manufacturing facilities spread across India, representatives in Houston Chicago USA and toll manufacturers in China.

Our manufacturing facility is FDA GMP approved and ISO-9001, ISO 14000, OHSAS 18000, ISO 22000, FSSAI HACCP certified. We are offering products manufactured as per Kosher and Halal approved method. We are pre-registered with "Reach" for export to European countries.

DA-355: Degradable Diverting Agent For High Temperature

DESCRIPTION
DA-355 is a high molecular weight polymer designed to be used as a flow diverting agent for use in stimulation applications in oil and gas fractures. DA-355 can be used with acids, linear & cross linked gels and slickwater for high temperature applications.

DA-355 is used for sealing perforations, existing fractures and natural fractures.  It can be used to protect producing zones during work-over operations.  It permits treatment of zones with porosity differences and separates the total treatment zone into stages. DA-355 diverting agent is offered in tight particle size distributions like 10/30, 30/70, 70/120 or mixtures thereof.  Larger sized particles permit bridging and smaller sized particles bridge across the larger particles, forming a low permeability zone.

DA-355 is extremely poorly soluble in water below 140 deg F. At formation temperatures above 175 deg F, DA-355 will hydrolyze in to water and condensate soluble products.  Typical half life of DA-355 is 2 weeks at bottom hole conditions.

DA-355 will bridge perforations and slots as wide as 0.35 inches. Typical usage is between 10 to 20 lbs per perforation.

BENEFITS
Helps distribute treating fluids uniformly in the zone
Helps control gels to perform multiple fractures
Dissolves completely post treatment, leaving no residue behind
Can be used up to 355 deg F Bottom Hole Temperatures

TYPICAL PHYSICAL PROPERTIES - SPECIFICATIONS
Appearance: White Solid
Specific Gravity: ~1.25

---

DA-LT: Low Temperature Diverting Agent

DESCRIPTION
DA-LT is a diverting agent for use in stimulation applications. DA-LT can be used with acids, linear gels and slickwater for high temperature applications. Compatibility tests are needed with cross-linked gels, as DA-LT might delay the crosslinking time.

DA-LT is used for sealing existing fractures and natural fractures. It can be used to protect producing zones during workover operations. It permits treatment of zones with porosity differences and separates the total treatment zone into stages. DA-LT diverting agent is offered in tight particle size distributions or mixtures thereof. Larger sized particles permit bridging and smaller sized particles bridge across the larger particles, forming a low permeability zone.

DA-LT is extremely poorly soluble in water below 90 deg F. At formation temperatures between 90 and 175 deg F, DA-LT will slowly dissolve in water and condensate.

DA-LT will soon be offered in a PSD for re-fracs, to bridge perforations and slots as wide as 0.35 inches.

DA-LT is added on the fly, be offered in a PSD for re-fracs, to bridge perforations and slots as wide as 0.35 inches.

Manufacturers

ANMOL CHEMICALS
S-8, SARIFA MANSION, 2ND PRINCIPAL SHAIKH HASAN MARG, MUMBAI 400009, INDIA
TEL: (OFF) 91-22-23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: info@anmol.org

Copyright and Usual Disclaimer is Applicable

Exporters to USA, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai etc., India

Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.

Diverting Agent
Low Temperature and High Temperature, Fracking Chemicals

We also offer Fracking Chemicals like:
Ammonium Persulfate
Acetic Acid Solution ------- Acid Emulsifier ------- Acid Retarder
Acid Corrosion Inhibitor --- Acid Viscosifier ------ ATMP Phosphonate
Barium Sulfate Scale Remover - Bis[HexaMethylene Triamine Penta (Methylene Phosphonic Acid)]
BME Iron Reducer ----------- Crosslinker ---------- Cement Defoamer
Clay Stabilizer ------------ Coil Tubing Lube ----- Citric Acid Solution ------- Diverting Agent
Diethylenetriamine penta methylene phosphonic acid- Didecyl Dimethyl Ammonium Chloride DDAC
Drag Reducing Agent -------- Encapsulated Gel Breaker - Enzyme Gel Breaker
Liquid Iron Control -------- Dry Friction Reducer - Flow Back Aid
Foam 810 ------------------- Corrosion Inhibitor cum Bactericide and Oxygen Scavenger
Heavy Crude Foamer --------- Friction Reducer ----- Foamer for Deliquification of Gas Wells
Guar Gum Slurry Powder ----- Glutaraldehyde ------- Glycerin
Gas Hydrate Inhibitor ------ Gel Sweep ------------ Iron Sulfide Scale Inhibitor
High pH Buffer ------------- HP-HT Lube ----------- HEDP Phosphonate
Non-Triazine Based Hydrogen Sulfide H2S Scavenger -- Hydrogen Sulfide H2S Scavenger
Liquid FR Breaker, Sodium Chlorite ---------------- Liquid Beads
Mud Remover or Mud Cleaner - Non Emulsifier for Acidizing
Non Emulsifier for Brines --- Oil Gelling Agent ---- Paraffin Dispersant
Pipe Pickle ---------------- Preformed Particle Gel for Conformance Control
Relative Permeability Modifier - Sodium Chlorite Solution - Scale Inhibitor
Extended Release Scale & Paraffin Inhibitor -------- Sand Consolidation System
Sodium Bromate ------------- THPS Tetrakis Hydroxymethyl Phosphonium Sulfate
Total Acidizing System ----- Xanthan Gum Slurry