  |
    |
| (FDA) GMP Approved, ISO-9001, ISO-22000 HACCP, & "REACH" registered Kosher & Halal Certified |
-------------- 
Boron & Zirconium Crosslinker for Guar Gel Manufacturers Suppliers Exporters, Fracking Chemicals India USA
Anmol Chemicals are manufacturers of Fracking or Fracturing Chemicals, Specialty Chemicals and Pharmaceutical Excipients, in India. Anmol Chemicals Group has manufacturing facilities spread across India, representatives in Houston Chicago USA and toll manufacturers in China.
Our manufacturing facility is FDA GMP approved and ISO-9001, ISO 14000, OHSAS 18000, ISO 22000, FSSAI HACCP certified. We are offering products manufactured as per Kosher and Halal approved method. We are pre-registered with "Reach" for export to European countries.
BBG-XL-4
>4% Boron, pH Buffered, Borate based liquid, Green Cross Linker. It is a green, glycol-free solution for cross linking guar, guar derivatives and other carbohydrate based fracturing fluids.
DESCRIPTION
BBG-XL-4 high Boron content buffered liquid Crosslinker. It is a green, glycol-free solution for cross linking guar, guar derivatives and other carbohydrate based fracturing fluids.
BBG-XL-4 offers convenience and flexibility in the creation & use of high viscosity cross linked gels which potentially increase fracture width and allow higher proppant loading.
BBG-XL-4 can be added on the fly, typical loading rates are 1 to 3 gpt based on fluid properties desired.
PHYSICAL PROPERTIES
Appearance: Clear Liquid
Odor: None
Boron Content: 4%
Specific Gravity: 1.3 to 1.4
pH: 11 to 13
Pour Point: 20 deg F
Typical Dosage: Typically used at 1 to 3 GPT depending on well conditions and desired result.
Temperature Limitations: Can be used across a wide temperature range, no lower or upper temperature limitations on performance. Typically used in wells with BHT up to 275 F, however the product will produce gels that are stable up to 350 F.
CX-10
4% Boron, Non-Buffered, Instant, Borate based, Cross Linker
Use: CX-10 is a high Boron content non-buffered liquid Cross Linker. It is a solution for cross linking guar, guar derivatives and other carbohydrate based fracturing fluids.
CX-10 offers convenience and flexibility in the creation & use of high viscosity cross linked gels which potentially increase fracture width and allow higher proppant loading.
CX-10 can be added on the fly, typical loading rates are 1 to 3 gpt based on desired fluid properties.
CX-10 should be used with a delayed buffer to reduce pumping horsepower requirements.
Physical & Chemical Properties:
Appearance: Clear Liquid
Odor: Glycol
Boron Content: 4% min
Specific Gravity: 1.1 to 1.20
pH: 4 to 9
Pour Point: 10 deg F
Typical Dosage: Typically used at 1 to 3 GPT depending on well conditions and desired result
Temperature Limitations: Can be used across a wide temperature range, no lower or upper temperature limitations on performance. Typically used in wells with BHT up to 275 F, however the product will produce gels that are stable up to 350 F.
CX-14
4% Boron, Delayed, Borate based, Cross Linker
Use: CX-14 is a high Boron content delayed liquid Cross Linker. It is a solution for cross linking guar, guar derivatives and other carbohydrate based fracturing fluids.
CX-14 is a suspension of slowly dissolving Boron particles and gives a typical crosslinking delay of 0.5 to 5 minutes, depending on loading and other conditions.
CX-14 can be winterized to extremely low pour-points for use in colder environments
CX-14 can be added on the fly, typical loading rates are 1 to 3 gpt based on desired fluid properties.
CX-14 should be used with a buffer to reduce pumping horsepower requirements.
Physical & Chemical Properties:
Appearance: Tan Liquid
Odor: Slight
Boron Content: 4% min
Specific Gravity: 1.35 to 1.45
pH: 4 to 9
Pour Point: 20 deg F
Typical Dosage: Typically used at 1 to 3 GPT depending on well conditions and desired result
Temperature Limitations: Can be used across a wide temperature range, no lower or upper temperature limitations on performance. Typically used in wells with BHT up to 275 F, however the product will produce gels that are stable up to 350 F.
Zirconium based crosslinker is also offered.
Manufacturers
ANMOL CHEMICALS
S-8, SARIFA MANSION, 2ND PRINCIPAL SHAIKH HASAN MARG, MUMBAI 400009, INDIA
TEL: (OFF) 91-22-23726950, 23774610, 23723564. FAX: 91-22-23728264
e-mail: info@anmol.org
Copyright and Usual Disclaimer is Applicable
Exporters to USA, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai etc., India
Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.
Boron & Zirconium Crosslinker
Guar Gel Linker, Fracking Chemicals
We also offer Fracking Chemicals like:
Ammonium Persulfate
Acetic Acid Solution ------- Acid Emulsifier ------- Acid Retarder
Acid Corrosion Inhibitor --- Acid Viscosifier ------ ATMP Phosphonate
Barium Sulfate Scale Remover - Bis[HexaMethylene Triamine Penta (Methylene Phosphonic Acid)]
BME Iron Reducer ----------- Crosslinker ---------- Cement Defoamer
Clay Stabilizer ------------ Coil Tubing Lube ----- Citric Acid Solution ------- Diverting Agent
Diethylenetriamine penta methylene phosphonic acid- Didecyl Dimethyl Ammonium Chloride DDAC
Drag Reducing Agent -------- Encapsulated Gel Breaker - Enzyme Gel Breaker
Liquid Iron Control -------- Dry Friction Reducer - Flow Back Aid
Foam 810 ------------------- Corrosion Inhibitor cum Bactericide and Oxygen Scavenger
Heavy Crude Foamer --------- Friction Reducer ----- Foamer for Deliquification of Gas Wells
Guar Gum Slurry Powder ----- Glutaraldehyde ------- Glycerin
Gas Hydrate Inhibitor ------ Gel Sweep ------------ Iron Sulfide Scale Inhibitor
High pH Buffer ------------- HP-HT Lube ----------- HEDP Phosphonate
Non-Triazine Based Hydrogen Sulfide H2S Scavenger -- Hydrogen Sulfide H2S Scavenger
Liquid FR Breaker, Sodium Chlorite ---------------- Liquid Beads
Mud Remover or Mud Cleaner - Non Emulsifier for Acidizing
Non Emulsifier for Brines --- Oil Gelling Agent ---- Paraffin Dispersant
Pipe Pickle ---------------- Preformed Particle Gel for Conformance Control
Relative Permeability Modifier - Sodium Chlorite Solution - Scale Inhibitor
Extended Release Scale & Paraffin Inhibitor -------- Sand Consolidation System
Sodium Bromate ------------- THPS Tetrakis Hydroxymethyl Phosphonium Sulfate
Total Acidizing System ----- Xanthan Gum Slurry